Copper-based inlaid self-lubricating guide components

Copper-based inlaid self-lubricating components

Copper-based inlaid self-lubricating guide components are a high-performance sliding bearing material, especially suitable for use in environments where conventional lubrication is not possible or maintenance is difficult. These components achieve self-lubrication, reduce wear and extend service life by inlaying solid lubricants (such as graphite, molybdenum disulfide, polytetrafluoroethylene, etc.) in the copper alloy matrix. The following are some key features and application areas of copper-based inlaid self-lubricating guide components:

Key features:

• Self-lubricating: Work without external lubrication, reducing maintenance costs and downtime.
• Wear resistance: Solid lubricants are evenly distributed in the copper alloy matrix, providing long-term stable low friction coefficient.
• High temperature resistance: Some types of copper-based inlaid self-lubricating materials can work at higher temperatures, such as -80°C to +250°C, or even higher temperatures up to 400°C.
• Load capacity: Able to withstand higher loads, suitable for heavy-duty applications.
• Low creep: The difference between dynamic and static friction coefficients is small, reducing creep or crawling at startup.
• Wide adaptability: suitable for a variety of working conditions, including high speed, heavy load, impact load, etc.
  Application areas:
• Hydraulic engineering: dam gate hoist, water pump bearing, etc.
• Construction machinery: excavator, crane joint bearings, sliders, etc.
• Metallurgical machinery: high temperature furnace door bearings, conveying equipment slides.
• Port machinery: crane, conveyor belt bearings.
• Hydraulic cylinder: piston rod seal support ring, guide sleeve.
• Aerospace: moving parts of aircraft.
• Automation equipment: linear guides, robot joints.
• General machinery: gearbox, compressor, pump bearing seat.

Common product types:

• Bearings (bushings, bushings)
• Sliders and guides
• Slide plates
• Gaskets and wear-resistant plates
• Copper bushings
• Self-lubricating sliding bearings
• Spherical bearings

Manufacturer:
Zhejiang Mingxu Machinery Manufacturing Co., Ltd. is a representative enterprise in this field. It has more than ten years of R&D and production experience. It can provide a variety of copper-based inlaid self-lubricating products, which have been widely used in the above-mentioned industries.
In general, copper-based inlaid self-lubricating parts are an indispensable part of modern industry. They improve the working efficiency of equipment, reduce maintenance costs and extend the service life of equipment.