MXB-JFFB Self-Lubricating Half Bearing
Cat:Self-Lubricating Bearing
MXB-JFFB self-lubricating half bearings refer to bearings that cover only half of the circumference of a shaft or axle, providing support and reducing...
See DetailsNon-standard custom self-lubricating mold standard parts refer to self-lubricating parts specially designed and manufactured according to specific mold design and application requirements. These standard parts are different from the standardized products commonly seen in the market. They are usually customized to meet special size, shape, material or performance requirements. Self-lubricating mold standard parts are mainly used in the mold industry, especially for occasions that need to reduce friction, reduce wear, improve production efficiency and reduce maintenance.
Features
Self-lubricating performance: These parts are designed with solid lubricants such as graphite, PTFE (polytetrafluoroethylene), etc., and can operate without the use of additional lubricants.
Customized design: Non-standard customization means that each part is designed according to the specific needs of the customer, which may involve special dimensions, tolerances, material selection, etc.
Wide applicability: Non-standard custom self-lubricating mold standard parts can be used in various mold types, such as injection molds, stamping molds, die-casting molds, etc.
Materials
Copper alloys: such as brass, bronze, etc., have good wear resistance and self-lubricating properties.
Steel: such as carbon steel, alloy steel, etc., suitable for applications requiring higher strength and wear resistance.
Composites: Combining a metal matrix with solid lubricants, such as copper alloys embedded with graphite particles.
Polymers: such as PTFE, used to reduce the coefficient of friction and improve chemical resistance.
Applications
Guide components: such as guide pins, guide sleeves, guide plates, etc., used for guiding and positioning during the opening and closing of the mold.
Sliding components: such as sliders, push rods, ejector mechanisms, etc., used for sliding and ejection operations inside the mold.
Wear-resistant components: such as wear-resistant blocks, wear-resistant sheets, etc., used in areas subject to high friction and wear.
Customization process
Mingxu Machinery's non-standard self-lubricating mold standard parts customization process is as follows:
Demand analysis: Communicate with customers to clarify details such as size, material, performance requirements, etc.
Design drawings: Draw CAD drawings according to requirements and confirm design parameters.
Sample production: Make samples for customer testing and verification.
Mass production: After confirming the samples, start mass production.
Quality control: Carry out strict quality inspections to ensure that the products meet the standards.
Delivery and after-sales: Complete product delivery and provide corresponding after-sales services.
If you need non-standard customized self-lubricating mold standard parts, it is recommended to contact Zhejiang Mingxu Machinery Manufacturing Co., Ltd. Directly([email protected]). We use professional knowledge and advanced production technology to obtain customized products that meet your specific needs.
MXB-JFFB self-lubricating half bearings refer to bearings that cover only half of the circumference of a shaft or axle, providing support and reducing...
See DetailsMXB-JUWP self-lubricating wear-resistant plate is a 5mm thick self-lubricating graphite inlaid wear-resistant plate developed and produced by Mingxu M...
See DetailsMXB-JSP self-lubricating wear-resistant plate is suitable for injection molding machines, automotive stamping molds, tire molds, factory machinery (ex...
See DetailsMSEW JIS 20mm Standard Wear Plate is based on high-strength brass, tin bronze, steel-copper bimetal, cast iron or bearing steel. The surface is inlaid...
See DetailsMX2000-2 nickel graphite dispersed alloy bearing is a new product among solid lubricating bearings. Compared with TF-1, this product has the character...
See DetailsSF-1X oil-free lubricating bearing is a rolled sliding bearing with steel plate as the base, spherical bronze powder sintered in the middle, and a mix...
See DetailsSF-1T is a special formula product designed for high PV value working conditions of gear oil pump. The product has special advantages of fatigue resis...
See DetailsSF-PK PEEK triple composite bearing is a novel sliding bearing, which consists of steel plate, copper powder layer, PTFE + filling material. The main ...
See DetailsBoundary lubricated lead-free bearings are improved on the basis of SF-2. Its performance is the same as SF-2, but the surface does not contain lead, ...
See DetailsThe SF-2S oil-free bearing, as an upgrade to the SF-2 series, stands out with its unique design concept and excellent performance. It features a solid...
See Details
Contact Us