MXB-JTW Metric Thrust Washer For Vehicle Transmissions
Cat:Self-Lubricating Bearing
MXB-JTW metric thrust washers are based on high-strength brass (ZCuZn25Al6), with solid lubricant (graphite or molybdenum disulfide) embedded in the m...
See Details
Copper-based inlaid self-lubricating slide plate
There are various types or types of copper-based inlaid self-lubricating products produced by Mingxu Machinery, which are mainly classified according to their structural characteristics and application requirements. Here are some common types or styles:
Self-lubricating bearings: These bearings can be plain bearings, spherical bearings or rolling bearings. They achieve self-lubricating properties by inlaying solid lubricants (such as graphite, molybdenum disulfide, etc.) in a copper alloy matrix.
Self-lubricating sliders: Copper-based self-lubricating sliders are often used where friction and wear need to be reduced, such as guide rail systems or mechanical support components.
Self-lubricating slides: These products are usually used in situations where sliding friction occurs, such as gate support hinges or other hydraulic structures.
Self-lubricating bushing: used to wrap around the shaft to reduce friction between the shaft and the hole and improve mechanical operation efficiency.
Self-lubricating bushings: Used as linings for mechanical components to reduce internal friction and wear.
Self-lubricating washers: used in bolted connections or other fasteners to reduce wear due to vibration.
Self-lubricating rings: Self-lubricating rings used in rotating applications such as fans, motors, or other rotating equipment.
Self-lubricating materials: In addition to the above-mentioned molded products, there are also self-lubricating materials themselves, which can be used to make any of the above products, or processed into specific shapes as needed.
Composite materials: Some copper-based self-lubricating products may combine multiple materials, such as a copper alloy matrix compounded with high-performance plastics such as PTFE (polytetrafluoroethylene) to improve performance.
Special types: Depending on specific industrial application requirements, there may also be specially designed self-lubricating products, such as special bearings for high temperatures, high speeds or specific chemical environments.
These types or types of copper-based inlaid self-lubricating products have become an ideal choice to replace traditional sliding bearings under various complex working conditions due to their self-lubricating properties, wear resistance, and strong adaptability. They are especially suitable for applications where lubrication is difficult and Where maintenance is inconvenient or where cleanliness and environmental protection are required.

Copper-based embedded self-lubricating components
MXB-JTW metric thrust washers are based on high-strength brass (ZCuZn25Al6), with solid lubricant (graphite or molybdenum disulfide) embedded in the m...
See Details
MXB-JFFB self-lubricating half bearings refer to bearings that cover only half of the circumference of a shaft or axle, providing support and reducing...
See Details
MXB-JDBS bronze-based solid inlaid self-lubricating spherical bearing is a spherical sliding bearing with inner and outer spherical surfaces. It can r...
See Details
SF stands for three-layer composite, namely steel plate layer, copper powder layer and plastic layer. The steel plate layer plays the role of assembly...
See Details
MXB-JESW slide plates are 2-hole and 4-hole wear-resistant heavy-duty slide plates. They are standardized products and compatible with many brands, su...
See Details
Mining machinery and equipment are very easy to wear during use. In order to extend the service life of the equipment, Mingxu Machinery recommends tha...
See Details
MXB-JGLXS guide rails are parts installed on both sides of the side core-pulling slider to ensure that the side core-pulling slider moves back and for...
See Details
MJGB oil-free injection guide bushings are standard components used in the plastic injection molding process, providing lubrication-free guidance and ...
See Details
SF-1SS is a highly corrosion-resistant and wear-resistant bearing made of stainless steel as the base material and PTFE sprayed on the surface. This m...
See Details
SF-1T is a special formula product designed for high PV value working conditions of gear oil pump. The product has special advantages of fatigue resis...
See Details
Contact Us