SF-1SS Stainless Steel Spray Bearing for highly corrosive environments in the marine industry

SF-1SS is a highly corrosion-resistant and wear-resistant bearing made of stainless steel as the base material and PTFE sprayed on the surface. This material is particularly suitable for strong acid, strong alkali, light load and medium and low speed occasions. Its wear resistance is significantly better than that of single PTFE sleeves and graphite sleeves. At present, this product has been widely used in chemical acid and alkali flow meters, pumps, valves and corrosion-resistant sliding parts in the marine industry.

Get A Quote

PREV：SF-1T High PV Special Bearing for Gear Oil Pump NEXT：SF-1S Stainless Steel Corrosion Resistant Bearing

Product Introduction
Parameter
Material Description
Contact Us

Product Features

1 Can work for a long time under oil-free conditions.

2 More suitable for low-speed and heavy-load workingconditions, with good wear resistance and extremely low frict.

3 Suitable for situations where oil film is difficult to form, such as reciprocating, rotating and intermittent movements.

4 Resistant to corrosion and oxidation.

5 Maintenance-free and long service life.

Why Choose Oilless Bearings

Reduce Manufacturing costs

There is no need for oil supply device, oil injection hole or oil groove processing, which can greatly save manufacturing costs.

Reduce Operating Costs

It greatly reduces the usage of lubricating oil, reduces equipment maintenance, and avoids hidden dangers caused by insufficient oil supply, effectively reducing operating costs.

Shorten Design Time

The oil-free design simplifies the product structure and effectively saves design time. We are professional ODM Suppliers of SF-1SS Stainless Steel Spray Bearing for highly corrosive environments in the marine industry

Conducive To Environmental Protection

No waste oil recycling is required, which is also beneficial to environmental protection.

Application Fields

High Temperature

·Steel factory

·Smelting furnace

·Drying equipment

·Baking oven

·Heat controller

Water Proof

·Dam gate

·Water pump

·Fluid switch structure

·Offshore structures

·Dock and silt machine equipment

Chemical Industry

·Chemical factory

·Electroplating equipment

·Wastewater treatment equipment

·Dyeing machinery

·Oil and chemical refining equipment

Energy

·Wind power

·New energy

Ship

·Deck crane

·Anchor

·Hatch cover

·Rudder arm

·Lifting machinery and lifting ring equipment

Automobile Manufacturing

·Stamping mold

·Welding structure

·Painting and drying line

·Metal conveyor belt

·Machine tools

Heavy Industry

·Steel pipe factory machinery

·Tire and paper mills

·Power plant

·Connecting toggle of mold injection machinery

Construction, Mining, Loading

·Mixers, grinders, pulverizers

·Construction machinery

·Mining equipment

·Connecting rod bearings

Bridges and Lift Rails

·Bridge bearings

·Beams, bridges, suspension bridges

·Nuclear energy related reactors

·Steam generator

Metallographic Structure and Material Structure

①Polytetrafluoroethylene and oleophilic fiber mixture 0.01-0.03mm
②Stainless steel back 0.7-2.3mm

Application Features

●The mixture of PTFE and oleophilic fiber can form a good transfer film to protect the grinding shaft during movement.
●Good wear resistance and low friction coefficient.
●Good running-in performance and no shaft biting phenomenon.
●Can be used in rotation, swinging and reciprocating motion.
●Good corrosion resistance.
●Because it does not contain lead, it can be used in green and environmentally friendly equipment such as food machinery and medical machinery.
●Typical uses: Mainly used in medium acid and strong alkali occasions, such as: chemical medium acid and alkali flowmeters, pumps, valves, printing and dyeing machinery, and corrosion-resistant sliding parts of the marine industry.

Chemical Properties

Model	Air	Vacuum	Water	Steam	Weak acid	Medium acid	Strong acid	Alkaline solution
SF-SS	good	good	good	good	good	N/A	N/A	good

MMD-10 End Surface Friction and Wear Test

Model	Test Duration	Test Conditions			Friction Coefficient	Final Temperature	Final Wear Amount
Model	Test Duration	Lubrication Type	Speed	Pressure	Friction Coefficient	(℃)	(mm)
SF-1SS	3hr	Dry	0.4m/s	3.5N/mm2	0.103	66	0.005
SF-1SS	3hr	Oil	0.4m/s	3.5N/mm2	0.066	65	0.005

Technical Parameters

●Maximum bearing pressure: 100N/mm2
●Applicable temperature range: -195~+280℃
●Maximum sliding speed: 2.5m/s
●Friction coefficient: 0.03~0.18
●Maximum allowable PV value (dry): 3.0N/mm2 .m/s
●Maximum allowable PV value (oil): 40N/mm2 .m/s
SUBMIT

About US

Zhejiang Mingxu Machinery Manufacturing Co., Ltd. Zhejiang Mingxu Machinery Manufacturing Co., Ltd., formerly known as Jiashan Mingxu Precision Machinery Factory, was founded in 2011. The company is located in the hinterland of the Yangtze River Delta Integrated Development Demonstration Zone, with location and convenient transportation. With more than ten years of manufacturing and R&D experience, the company has been deeply involved in the development and production of solid lubricating bearings, skateboards, slideways, and sliders. ODM Suppliers and Company of SF-1SS Stainless Steel Spray Bearing for highly corrosive environments in the marine industry in China. The product manufacturing adopts modern automation equipment, strictly implements the ISO2000 quality management system standard, and the main processes are processed by high-precision CNC machines. The company's main products cover a series of products such as JDB solid inlaid self-lubricating bearings, steel-copper sintered bearings, SF-1 self-lubricating bearings, SF-2 boundary self-lubricating bearings, and FB090 copper bearings. Widely used in automobile industry, construction machinery, metallurgical equipment, mining machinery, injection molding, mold, textile, printing and many other machinery manufacturing fields; Till now, the company's products have spread all over China and exported to many foreign countries, and are deeply recognized and loved by domestic and foreign customers.

Mingxu Machinery adheres to the service tenet of "quality-oriented high-quality service", and strive to provide customers with professional products and services. Supply Wholesale SF-1SS Stainless Steel Spray Bearing for highly corrosive environments in the marine industry. The company will continue to introduce talents, improve the management mechanism, integrity, development, innovation, and strive to build a world-class brand.